Filter by:
Case study type
Return results that match any of the selected types.
- National legislative frameworks
- Policies/good practices
Geographical coverage
Return results that match any of the selected types.
- National
- Sub-national
Implementing body
Return results that match any of the selected types.
- Government
- Industry
- National ministry
Voluntary or legally binding
Return results that match any of the selected types.
- Legally binding
Country
- Guyana (1)
- Malawi (1)
- Maldives (3)
- United Republic of Tanzania (1)
Regulatory approach
Return results that match any of the selected types.
- Bans and restrictions
- Waste management legislation
- Combined actions
- Other actions
Law and Plastics Taxonomy
-
Compliance and enforcement
(1)
- Emissions and releases (24)
- Impacts (7)
- Littering (8)
-
Marine litter
(9)
- Institutional arrangements (6)
-
Coordination
(4)
- Cabon budget processes (1)
- Climate strategies (1)
- Cross-departmental consultation (1)
- Disaster risk management (3)
- District (2)
- Educational background (1)
- Environment Agency (1)
- Environmental Ministry (1)
- Government departments (3)
- Intergovernmental programmes (2)
- Risk reduction (2)
- Sectoral carbon budget (1)
- Semi-government organizations (2)
- Financing (1)
- Integration and mainstreaming (4)
- Public participation (5)
- Plastic materials and production (20)
-
Microplastics
(3)
-
Primary microplastics
(2)
- Plastic polymers (7)
-
Synthetic polymers
(7)
- Polyethylene terephthalate (4)
-
Polyolefins
(1)
- Polystyrene (5)
- Plastics (19)
- Policy approaches (15)
- Circular economy (9)
-
Economic instruments
(5)
- Fines (2)
-
Taxes
(3)
- Extended Producer Responsibility (3)
- Life-cycle approach (2)
- Product bans (2)
- Problematic and avoidable plastic products (16)
-
Short-lived plastic products
(16)
-
Plastic packaging
(12)
- Plastic carrier bags (11)
-
Plastic containers
(2)
- Single-use plastic products (14)
- Product design, composition and performance (3)
-
Product design and performance
(3)
-
Labelling
(3)
- Waste management (23)
-
Dumping
(4)
- Fishing gear (2)
- Waste (22)
- Domestic waste (2)
- Dumpsites (1)
-
Hazardous waste
(3)
- Waste collection (3)
- Waste disposal (2)
- Waste management facilities (1)
- Waste management plans (1)
- Waste minimization (8)
- Waste prevention (1)
- Waste treatment and processing (17)
Showing 1 - 6 of 6 resultsCase study | 2023Dar es Salaam Metropolitan Development Project Phase 2The objective of the Second Phase of the Dar Es Salaam Metropolitan Development Project for Tanzania is to improve climate resilient urban infrastructure and services and strengthen institutional capacity in the Dar es Salaam Region. The second component is the integrated solid waste management infrastructure and services. This component includes four subcomponents: waste disposal, waste transfer...CountryUnited Republic of Tanzania
Case study | 2021Plastic Pollution Policy Country Profile: MalawiThis Policy Brief outlines: 1) the nature of the plastic pollution problem in Malawi, 2) available information about the national, subnational, and to a smaller extent, international policy landscape guiding government approaches to the plastic pollution problem in Malawi, and 3) what, if any, information exists about the effectiveness of these policy approaches. Source: Griffin, M., and R...CountryMalawi
Case study | 2021Environmental and Social Management Plan for Upgrading of Island Waste and Resource Management Centre with Anaerobic Technology at Muli, Meemu AtollMuli is one of the 9 inhabited islands in Meemu atoll in the central Maldives. Like almost all island of Maldives, the Muli island is also vulnerable to environmental and economic development variables such as waste management, rising sea level, coastal erosion, pollution/depletion of groundwater. Traditionally, food waste is generally disposed to the shoreline while other organic waste was burnt...CountryMaldives
Case study | 2021Environmental and Social Management Plan for Upgrading of Island Waste and Resource Management Centre with Anaerobic Technology at Nilandhoo, Faafu AtollNilandhoo is one of the 5 inhabited islands Faafu atoll in the southcentral area of Maldives. Similar to almost all island of Maldives, the island is vulnerable to environmental and economic development variables such as rising sea level, coastal erosion, pollution/depletion of groundwater and unmanaged waste. The existing IWRMC on the SE end of the island was developed by the Island Council. The...CountryMaldives
Case study | 2021Single Use Plastic Phase Out PlanThis phase-out plan is a national initiative to phase-out the production, import and consumption of certain single-use plastics in the Maldives and promote the use of sustainable alternatives, in the effort to protect human health and the vulnerable marine environment of the country. In addition, by using strategic awareness and educational campaigns, the aim of this plan is to reduce the...CountryMaldives
Case study | 2010Haags Bosch Sanitary Landfill FacilityThe increase in solid waste volumes through an expanding tourism industry and changes in consumption patterns in Guyana has prompted steady improvement in the Haags Bosch Sanitary Landfill Facility (HBSLF). The HBSLF is one of the most modern of its kind in the Caribbean. It is fully operational and uses best practices that includes waste segregation, leachate treatment, waste recovery, monitoring...CountryGuyana
- Waste management (23)
-
Labelling
(3)
- Single-use plastic products (14)
-
Plastic packaging
(12)
- Polystyrene (5)
- Plastic polymers (7)
-
Primary microplastics
(2)
- Institutional arrangements (6)
- Emissions and releases (24)