Filter by:
Case study type
Return results that match any of the selected types.
- National legislative frameworks
- Policies/good practices
Geographical coverage
Return results that match any of the selected types.
- National
Implementing body
Return results that match any of the selected types.
- Government
- National ministry
Voluntary or legally binding
Return results that match any of the selected types.
- Legally binding
- Voluntary
Country
- Colombia (2)
- Kenya (1)
- Maldives (2)
- Mexico (1)
Regulatory approach
Return results that match any of the selected types.
- Bans and restrictions
- Product standards, certification and labelling requirements
- Combined actions
- Other actions
Law and Plastics Taxonomy
-
Compliance and enforcement
(1)
- Emissions and releases (24)
- Impacts (7)
- Littering (8)
-
Marine litter
(9)
- Institutional arrangements (6)
-
Coordination
(4)
- Cabon budget processes (1)
- Climate strategies (1)
- Cross-departmental consultation (1)
- Disaster risk management (3)
- District (2)
- Educational background (1)
- Environment Agency (1)
- Environmental Ministry (1)
- Government departments (3)
- Intergovernmental programmes (2)
- Risk reduction (2)
- Sectoral carbon budget (1)
- Semi-government organizations (2)
- Financing (1)
- Integration and mainstreaming (4)
- Public participation (5)
- Plastic materials and production (20)
-
Microplastics
(3)
-
Primary microplastics
(2)
- Plastic polymers (7)
-
Synthetic polymers
(7)
- Polyethylene terephthalate (4)
-
Polyolefins
(1)
- Polystyrene (5)
- Plastics (19)
- Policy approaches (15)
- Circular economy (9)
-
Economic instruments
(5)
- Fines (2)
-
Taxes
(3)
- Extended Producer Responsibility (3)
- Life-cycle approach (2)
- Product bans (2)
- Problematic and avoidable plastic products (16)
-
Short-lived plastic products
(16)
-
Plastic packaging
(12)
- Plastic carrier bags (11)
-
Plastic containers
(2)
- Single-use plastic products (14)
- Product design, composition and performance (3)
-
Product design and performance
(3)
-
Labelling
(3)
- Waste management (23)
-
Dumping
(4)
- Fishing gear (2)
- Waste (22)
- Domestic waste (2)
- Dumpsites (1)
-
Hazardous waste
(3)
- Waste collection (3)
- Waste disposal (2)
- Waste management facilities (1)
- Waste management plans (1)
- Waste minimization (8)
- Waste prevention (1)
- Waste treatment and processing (17)
Showing 1 - 6 of 6 resultsCase study | 2022Colombian LCA protocol based on Colombian Technical Standard under ISO 14040Substituting single-use plastic products (SUPP) In 2022, the Colombian Congress approved a law [see Spanish version here] introducing the ban and gradual substitution of 14 single-use plastic products. In preparing the law, the plastic materials to be banned and possible substitutes were evaluated and compared by using standardized LCA protocols based on the Colombian Technical Standard under ISO...CountryColombia
Case study | 2021Plastic Pollution Policy Country Profile: KenyaThis Policy Brief outlines: 1) the nature of the plastic pollution problem in Kenya, 2) available information about the national, subnational, and to a smaller extent, international policy landscape guiding government approaches to the plastic pollution problem in Kenya, and 3) what, if any, information exists about the effectiveness of these policy approaches. Source: Griffin, M., and R. Karasik...CountryKenya
Case study | 2021Plastic Pollution Policy Country Profile: MaldivesThis Policy Brief outlines: 1) the nature of the plastic pollution problem in Maldives, 2) available information about the national, subnational, and to a smaller extent, international policy landscape guiding government approaches to the plastic pollution problem in Maldives, and 3) what, if any, information exists about the effectiveness of these policy approaches. Source: Karasik, R. 2022. “...CountryMaldives
Case study | 2021Plastic Pollution Policy Country Profile: MexicoThis Policy Brief outlines: 1) the nature of the plastic pollution problem in Mexico, 2) available information about the national, subnational, and to a smaller extent, international policy landscape guiding government approaches to the plastic pollution problem in Mexico, and 3) what, if any, information exists about the effectiveness of these policy approaches, Source: Griffin, M. and R. Karasik...CountryMexico
Case study | 2021Single Use Plastic Phase Out PlanThis phase-out plan is a national initiative to phase-out the production, import and consumption of certain single-use plastics in the Maldives and promote the use of sustainable alternatives, in the effort to protect human health and the vulnerable marine environment of the country. In addition, by using strategic awareness and educational campaigns, the aim of this plan is to reduce the...CountryMaldives
Case study | 2013Eko RedThe theme of the Eko Red project, a green company, is “The circular economy: reuse, reuse and recycle” given that we are a company focused on the design and operation of a sustainable model that allows us to recycle post-industrial products into the supply chain through a circular economy model that includes recyclers, warehouses and factories; enabling the reduction of environmental impacts and...CountryColombia
- Waste management (23)
-
Labelling
(3)
- Single-use plastic products (14)
-
Plastic packaging
(12)
- Polystyrene (5)
- Plastic polymers (7)
-
Primary microplastics
(2)
- Institutional arrangements (6)
- Emissions and releases (24)