Filter by:
Case study type
Return results that match any of the selected types.
- National legislative frameworks
- Policies/good practices
Geographical coverage
Return results that match any of the selected types.
- National
- Regional
Implementing body
Return results that match any of the selected types.
- Government
- National ministry
Voluntary or legally binding
Return results that match any of the selected types.
- Legally binding
Country
- Australia (1)
- Botswana (1)
- Gambia (1)
- Ghana (1)
- Kenya (1)
- Malawi (1)
- Maldives (2)
- Mauritius (1)
- Mexico (1)
- Rwanda (1)
- Seychelles (1)
- South Africa (1)
- Uganda (1)
- United Republic of Tanzania (1)
- Zambia (1)
- Zimbabwe (1)
Regulatory approach
Return results that match any of the selected types.
- Combined actions
- Other actions
Law and Plastics Taxonomy
-
Compliance and enforcement
(1)
- Emissions and releases (24)
- Impacts (7)
- Littering (8)
-
Marine litter
(9)
- Institutional arrangements (6)
-
Coordination
(4)
- Cabon budget processes (1)
- Climate strategies (1)
- Cross-departmental consultation (1)
- Disaster risk management (3)
- District (2)
- Educational background (1)
- Environment Agency (1)
- Environmental Ministry (1)
- Government departments (3)
- Intergovernmental programmes (2)
- Risk reduction (2)
- Sectoral carbon budget (1)
- Semi-government organizations (2)
- Financing (1)
- Integration and mainstreaming (4)
- Public participation (5)
- Plastic materials and production (20)
-
Microplastics
(3)
-
Primary microplastics
(2)
- Plastic polymers (7)
-
Synthetic polymers
(7)
- Polyethylene terephthalate (4)
-
Polyolefins
(1)
- Polystyrene (5)
- Plastics (19)
- Policy approaches (15)
- Circular economy (9)
-
Economic instruments
(5)
- Fines (2)
-
Taxes
(3)
- Extended Producer Responsibility (3)
- Life-cycle approach (2)
- Product bans (2)
- Problematic and avoidable plastic products (16)
-
Short-lived plastic products
(16)
-
Plastic packaging
(12)
- Plastic carrier bags (11)
-
Plastic containers
(2)
- Single-use plastic products (14)
- Product design, composition and performance (3)
-
Product design and performance
(3)
-
Labelling
(3)
- Waste management (23)
-
Dumping
(4)
- Fishing gear (2)
- Waste (22)
- Domestic waste (2)
- Dumpsites (1)
-
Hazardous waste
(3)
- Waste collection (3)
- Waste disposal (2)
- Waste management facilities (1)
- Waste management plans (1)
- Waste minimization (8)
- Waste prevention (1)
- Waste treatment and processing (17)
Showing 1 - 5 of 5 resultsCase study | 2021Plastic Pollution Policy Country Profile: AustraliaThis Policy Brief outlines: 1) the nature of the plastic pollution problem in Australia, 2) available information about the national, subnational, and to a smaller extent, international policy landscape guiding government approaches to the plastic pollution problem in Australia, and 3) what, if any, information exists about the effectiveness of these policy approaches. Source: Bering, J. and R...CountryAustralia
Case study | 2021Plastic Pollution Policy Country Profile: MexicoThis Policy Brief outlines: 1) the nature of the plastic pollution problem in Mexico, 2) available information about the national, subnational, and to a smaller extent, international policy landscape guiding government approaches to the plastic pollution problem in Mexico, and 3) what, if any, information exists about the effectiveness of these policy approaches, Source: Griffin, M. and R. Karasik...CountryMexico
Case study | 2021Environmental and Social Management Plan for Upgrading of Island Waste and Resource Management Centre with Anaerobic Technology at Muli, Meemu AtollMuli is one of the 9 inhabited islands in Meemu atoll in the central Maldives. Like almost all island of Maldives, the Muli island is also vulnerable to environmental and economic development variables such as waste management, rising sea level, coastal erosion, pollution/depletion of groundwater. Traditionally, food waste is generally disposed to the shoreline while other organic waste was burnt...CountryMaldives
Case study | 2021Environmental and Social Management Plan for Upgrading of Island Waste and Resource Management Centre with Anaerobic Technology at Nilandhoo, Faafu AtollNilandhoo is one of the 5 inhabited islands Faafu atoll in the southcentral area of Maldives. Similar to almost all island of Maldives, the island is vulnerable to environmental and economic development variables such as rising sea level, coastal erosion, pollution/depletion of groundwater and unmanaged waste. The existing IWRMC on the SE end of the island was developed by the Island Council. The...CountryMaldives
Case studyAfrica Region – Plastic Pollution and Marine Litter Law and PolicyAfrica, the second largest continent in the world, is experiencing a higher urban population growth (estimated at 3.5% per year) than any other continent, with a steep rise in the middle class and the associated increase of municipal solid waste from 0.78kg per capita per day to 0.99kg by 2025. When coupled with various waste management challenges, there is an expected increase in mismanaged waste...CountryBotswanaGambiaGhanaKenyaMalawiMauritiusRwandaSeychellesSouth AfricaUgandaUnited Republic of TanzaniaZambiaZimbabwe
- Waste management (23)
-
Labelling
(3)
- Single-use plastic products (14)
-
Plastic packaging
(12)
- Polystyrene (5)
- Plastic polymers (7)
-
Primary microplastics
(2)
- Institutional arrangements (6)
- Emissions and releases (24)