UNEP would like to thank the World Resources Institute, the Nicholas Institute for Environmental Policy Solutions at Duke University and the University of Strathclyde for their invaluable assistance with the collation of these laws, as well as its long-standing partner FAOLEX.
Filter by:
Country
- Andorra (1)
- Australia (8)
- Austria (1)
- Belgium (1)
- Benin (2)
- Brazil (1)
- Brunei Darussalam (2)
- Bulgaria (1)
- Canada (5)
- Chile (1)
- China (2)
- Colombia (2)
- Costa Rica (3)
- Denmark (1)
- Ecuador (8)
- Egypt (1)
- European Union (11)
- Finland (2)
- France (3)
- Germany (2)
- Grenada (1)
- Hungary (1)
- India (1)
- Ireland (6)
- Kenya (4)
- Latvia (2)
- Malawi (1)
- Maldives (1)
- Malta (4)
- Mexico (3)
- Mozambique (1)
- Namibia (1)
- Netherlands (1)
- New Zealand (2)
- Nigeria (1)
- North Macedonia (1)
- Pakistan (2)
- Palau (1)
- Panama (1)
- Paraguay (3)
- Peru (9)
- Portugal (4)
- Romania (1)
- Samoa (1)
- Seychelles (4)
- Spain (4)
- Sweden (1)
- Timor-Leste (1)
- Togo (1)
- United Kingdom of Great Britain and Northern Ireland (8)
- United Republic of Tanzania (1)
- United States of America (24)
- Uruguay (2)
- Viet Nam (3)
Regulatory Approach
- Bans and restrictions
- Economic instruments (taxes, levies, subsidies)
- Extended producer responsibility (EPR)
- Waste management legislation
- Combined actions
- Other actions
Year
Law and Plastics Taxonomy
-
Compliance and enforcement
(188)
- Enforcement (180)
- Verification of compliance (29)
- Emissions and releases (72)
- Impacts (7)
- Littering (18)
-
Marine litter
(41)
- Marine plastic litter (5)
- Maritime sources (5)
- Pollutants (2)
- Pollution of the marine environment (15)
- Plastic materials and production (156)
-
Microplastics
(23)
-
Primary microplastics
(8)
- Microbeads (8)
- Monomers (1)
- Plastic polymers (139)
-
Synthetic polymers
(88)
- Polyethylene terephthalate (27)
-
Polyolefins
(53)
- Polyethylene (33)
- Polypropylene (36)
- Polystyrene (60)
- Styrofoam (2)
- Polyvinyl chloride (4)
- Plastics (4)
- Plastics types (25)
- Bioplastics (3)
- Oxo-degradable plastics (23)
- Thermoplastics (2)
- Policy approaches (247)
- Circular economy (26)
-
Economic instruments
(124)
- Deposit-refund schemes (24)
- Fines (28)
-
Fiscal incentives
(24)
- Subsidies (1)
- Taxes (53)
- Levies (43)
- Extended Producer Responsibility (70)
- Just transition (3)
- Life-cycle approach (19)
- Life-cycle assessment (8)
- Life cycle (1)
- Product bans (75)
- Plastic bag bans (2)
- Regulatory impact assessments (1)
- Problematic and avoidable plastic products (292)
- Exempted products (9)
-
Short-lived plastic products
(290)
-
Plastic packaging
(262)
-
Plastic carrier bags
(195)
- Lightweight plastic carrier bags (8)
- Very lightweight plastic carrier bags (39)
- Plastic containers (5)
- Plastic beverage containers (4)
- Plastic food containers (1)
- Plastic sheets (1)
- Recyclable packaging (57)
- Reusable packaging (45)
- Single-use plastic products (112)
- Disposable cups (1)
- Personal protective equipment (2)
- Plastic straws (12)
- Plastic utensils (2)
- Product design, composition and performance (177)
-
Alternative plastics and plastic products
(109)
- Bio-based plastics (1)
-
Biodegradable plastics
(92)
- Compostable plastics (53)
- Product design and performance (81)
- Certification (37)
- Labelling (51)
- Recyclability (1)
- Thickness (2)
- Product standardization (22)
-
Product design standards
(13)
- Design for recycling (1)
- Eco-design (3)
- Stakeholder engagement (35)
- Consultations (6)
- Waste pickers (9)
- Waste management (561)
-
Dumping
(5)
- Ocean dumping (1)
- Open dumping (1)
- Environmentally sound waste management (1)
- Fishing gear (6)
- Integrated coastal zone management (8)
- Transboundary movement of plastic waste (9)
- Waste export (9)
- Waste (418)
- Domestic waste (43)
-
Hazardous waste
(154)
- Toxic waste (23)
- Medical waste (14)
- Organic waste (1)
- Plastic waste (260)
- Solid waste (1)
- Waste collection (59)
- Waste disposal (131)
- Waste management facilities (4)
- Disposal facilities (1)
- Waste management hierarchy (160)
- Waste management plans (2)
- Waste minimization (6)
- Reuse (4)
- Waste prevention (64)
- Waste streams (1)
- Waste treatment and processing (88)
- Polymer degradation (1)
-
Resource recovery
(87)
- Recycling (87)
Showing 111 - 120 of 160 resultsWaste Reduction and Recycling Act 2011.| 2011 |Legislation
AustraliaThis Act, consisting of 16 Chapters divided into 302 sections, aims at promoting waste avoidance and reduction, and resource recovery and efficiency actions; reducing the consumption of natural resources and minimizing the disposal of waste by encouraging waste avoidance and the recovery, re-use and recycling of waste; minimizing the overall impact of waste generation and disposal; ensuring a...
KeywordsBiodegradable plastics, Compostable plastics, Extended Producer Responsibility, Plastic carrier bags, Plastic waste, Recyclable packaging, Very lightweight plastic carrier bags, Waste management hierarchyEnvironment Protection (Beverage Containers and Plastic Bags) Regulations.| 2011 |Regulation
AustraliaThese Regulations, consisting of 13 sections divided into four Parts and completed by one Schedule, declare certain liquids not to be beverages and exempts certain beverage containers from the operation of the container deposit scheme (CDS). A regulated container is a container to which the CDS applies and for which a supply approval is in force and that bears the approved refund marking. The...
KeywordsBiodegradable plastics, Compostable plastics, Domestic waste, Extended Producer Responsibility, Hazardous waste, Plastic carrier bags, Plastic waste, Recyclable packaging, Toxic waste, Very lightweight plastic carrier bags, Waste management hierarchyBeverage Containers Act (RSNB 2011, c 121).| 2011 |Legislation
CanadaRepealedThe purpose of the present Act is to reduce landfill waste and litter left on roads and in waterways, and to establish beverage container standards, Recycling Centres. The Act includes a deposit/refund system for soft drink, juice and alcohol containers; uniform labelling, size and type specifications. The text - consisting of 23 sections – deals, inter alia, with the following aspects: definition...
KeywordsExtended Producer Responsibility, Hazardous waste, Recyclable packaging, Waste management hierarchyDécret n° 2011-003-PR du 05 janvier 2011 fixant les modalités de gestion des sachets et emballages plastiques au Togo.| 2011 |Regulation
TogoLe présent décret fixe les modalités de la gestion de la production, de l’importation, de la distribution, de la commercialisation, de l’usage, de la collecte et du recyclage des sachets et emballages plastiques au Togo. Ce décret interdit la production, l’importation, la distribution et la commercialisation des sachets et emballages plastiques non biodégradables au Togo. Par contre, il autorise...
KeywordsBiodegradable plastics, Plastic carrier bags, Plastic waste, Recyclable packaging, Waste management hierarchySupreme Decree No. 011-2010-MINAM| 2010 |Regulation
PeruKeywordsBiodegradable plastics, Waste management hierarchyLaw on Management of Packaging and Packaging Waste| 2009 |Legislation
North MacedoniaThis Law regulates the requirements for environmental protection that must be met by packaging in general during its production, placing on the market and putting into use and the treatment of packaging waste. This text is covering the obligations and responsibilities of economic operators and other entities participating in the production process, placing on the market and putting into use of...
KeywordsHazardous waste, Recyclable packaging, Waste management hierarchyDecision No. 2149/QD-TTg - Approving the National Strategy for Integrated Management of Solid Waste up to 2025, with a Vision to 2050| 2009 |Legislation
Viet NamKeywordsHazardous waste, Waste management hierarchyDirective 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives (European Waste Framework Directive)| 2008 |Legislation
European UnionKeywordsEnforcement, Extended Producer Responsibility, Hazardous waste, Labelling, Recycling, Stakeholder engagement, Verification of compliance, Waste disposal, Waste management, Waste management hierarchy, Waste preventionEnvironmental Management (Waste Management and Sanitation) Regulations| 2008 |Regulation
MalawiKeywordsRecycling, Waste collection, Waste disposal, Waste management, Waste management hierarchyPackaging and Printed Paper Stewardship Regulation (Man. Reg. 195/2008).| 2008 |Regulation
CanadaThe present Regulation enforces the Waste Reduction and Prevention Act. The Regulation requires affected companies to register as product stewards and to remit fees that are used to cover up to 80% of the cost of municipal recycling programmes. The text consists of 21 sections.
KeywordsWaste management hierarchyPagination
-
Plastic carrier bags
(195)
-
Plastic packaging
(262)
-
Primary microplastics
(8)