UNEP would like to thank the World Resources Institute, the Nicholas Institute for Environmental Policy Solutions at Duke University and the University of Strathclyde for their invaluable assistance with the collation of these laws, as well as its long-standing partner FAOLEX.
Filter by:
Country
- Argentina (1)
- Australia (1)
- Austria (1)
- Barbados (1)
- Bhutan (1)
- Botswana (1)
- Chile (1)
- Colombia (2)
- Croatia (1)
- Cyprus (1)
- Estonia (1)
- Ethiopia (2)
- European Union (3)
- Finland (1)
- France (1)
- Gabon (1)
- Gambia (1)
- Georgia (2)
- Germany (1)
- Hungary (1)
- India (1)
- Indonesia (2)
- Israel (1)
- Jamaica (1)
- Japan (1)
- Jordan (1)
- Lithuania (1)
- Malawi (1)
- Mali (1)
- Malta (2)
- Marshall Islands (2)
- Mauritius (4)
- Mexico (6)
- Monaco (1)
- Mongolia (1)
- Morocco (1)
- Namibia (3)
- Netherlands (1)
- Nigeria (1)
- North Macedonia (1)
- Palau (1)
- Panama (1)
- Philippines (1)
- Poland (1)
- Portugal (1)
- Qatar (1)
- Republic of Korea (1)
- Rwanda (3)
- Samoa (1)
- Senegal (1)
- Serbia (1)
- Singapore (1)
- Slovakia (2)
- South Africa (1)
- Spain (1)
- Uganda (2)
- United Kingdom of Great Britain and Northern Ireland (2)
- United Republic of Tanzania (1)
- United States of America (2)
- Uzbekistan (1)
- Vanuatu (1)
- Zambia (1)
- Zimbabwe (1)
Regulatory Approach
- Bans and restrictions
- Economic instruments (taxes, levies, subsidies)
- Extended producer responsibility (EPR)
- Product standards, certification and labelling requirements
- Waste management legislation
- Combined actions
- Other actions
Year
Law and Plastics Taxonomy
-
Compliance and enforcement
(188)
- Enforcement (180)
- Verification of compliance (29)
- Emissions and releases (72)
- Impacts (7)
- Littering (18)
-
Marine litter
(41)
- Marine plastic litter (5)
- Maritime sources (5)
- Pollutants (2)
- Pollution of the marine environment (15)
- Plastic materials and production (156)
-
Microplastics
(23)
-
Primary microplastics
(8)
- Microbeads (8)
- Monomers (1)
- Plastic polymers (139)
-
Synthetic polymers
(88)
- Polyethylene terephthalate (27)
-
Polyolefins
(53)
- Polyethylene (33)
- Polypropylene (36)
- Polystyrene (60)
- Styrofoam (2)
- Polyvinyl chloride (4)
- Plastics (4)
- Plastics types (25)
- Bioplastics (3)
- Oxo-degradable plastics (23)
- Thermoplastics (2)
- Policy approaches (247)
- Circular economy (26)
-
Economic instruments
(124)
- Deposit-refund schemes (24)
- Fines (28)
-
Fiscal incentives
(24)
- Subsidies (1)
- Taxes (53)
- Levies (43)
- Extended Producer Responsibility (70)
- Just transition (3)
- Life-cycle approach (19)
- Life-cycle assessment (8)
- Life cycle (1)
- Product bans (75)
- Plastic bag bans (2)
- Regulatory impact assessments (1)
- Problematic and avoidable plastic products (292)
- Exempted products (9)
-
Short-lived plastic products
(290)
-
Plastic packaging
(262)
-
Plastic carrier bags
(195)
- Lightweight plastic carrier bags (8)
- Very lightweight plastic carrier bags (39)
- Plastic containers (5)
- Plastic beverage containers (4)
- Plastic food containers (1)
- Plastic sheets (1)
- Recyclable packaging (57)
- Reusable packaging (45)
- Single-use plastic products (112)
- Disposable cups (1)
- Personal protective equipment (2)
- Plastic straws (12)
- Plastic utensils (2)
- Product design, composition and performance (177)
-
Alternative plastics and plastic products
(109)
- Bio-based plastics (1)
-
Biodegradable plastics
(92)
- Compostable plastics (53)
- Product design and performance (81)
- Certification (37)
- Labelling (51)
- Recyclability (1)
- Thickness (2)
- Product standardization (22)
-
Product design standards
(13)
- Design for recycling (1)
- Eco-design (3)
- Stakeholder engagement (35)
- Consultations (6)
- Waste pickers (9)
- Waste management (561)
-
Dumping
(5)
- Ocean dumping (1)
- Open dumping (1)
- Environmentally sound waste management (1)
- Fishing gear (6)
- Integrated coastal zone management (8)
- Transboundary movement of plastic waste (9)
- Waste export (9)
- Waste (418)
- Domestic waste (43)
-
Hazardous waste
(154)
- Toxic waste (23)
- Medical waste (14)
- Organic waste (1)
- Plastic waste (260)
- Solid waste (1)
- Waste collection (59)
- Waste disposal (131)
- Waste management facilities (4)
- Disposal facilities (1)
- Waste management hierarchy (160)
- Waste management plans (2)
- Waste minimization (6)
- Reuse (4)
- Waste prevention (64)
- Waste streams (1)
- Waste treatment and processing (88)
- Polymer degradation (1)
-
Resource recovery
(87)
- Recycling (87)
Showing 31 - 40 of 87 resultsLoi n° 2015-09 du 04 mai 2015 relative à l’interdiction de la production, de l’importation, de la détention, de la distribution, de l’utilisation de sachets plastiques de faible micronnage et à la gestion rationnelle des déchets plastiques.| 2015 |Legislation
SenegalRepealedLa présente loi interdit, sur toute l’étendue du territoire national, la production, l’importation, l’utilisation, la détention en vue de la mise en vente et la vente ou la distribution à titre gratuit de sachets plastiques d’une épaisseur inférieure à 30 microns. Cependant, les sachets plastiques d’une épaisseur supérieure ou égale à 30 microns sont autorisés et doivent respecter les normes...
KeywordsEnforcement, Extended Producer Responsibility, Plastic carrier bags, Plastic polymers, Product bans, RecyclingBan on Plastic Bags Order, 2015.| 2015 |Regulation
GambiaThese Regulations, made by the Chairman of the National Environment Management Council under section 63(1) of the National Environment Management Act, prohibits the manufacture, importation, use or sale of plastic bags in The Gambia. The Chairman shall issue a Notice in the gazette to establish a list of plastic packaging materials that may be used in exceptional cases in The Gambia. An importer...
KeywordsEnforcement, Plastic carrier bags, Product bans, RecyclingFramework agreement to reduce the consumption of lightweight plastic carrier bags (Plastic Carrier Bag Agreement)| 2015 |Legislation
FinlandKeywordsAlternative plastics and plastic products, Economic instruments, Lightweight plastic carrier bags, Plastic carrier bags, Plastic packaging, Product bans, Recycling, Single-use plastic products, Waste managementPublic and Environmental Health Act, 2015 (No. 1 of 2015).| 2015 |Legislation
NamibiaThis Act provides with respect to matters of public health in Namibia. The objects of this Act are to: (a) promote public health and wellbeing; (b) prevent injuries, diseases and disabilities; (c) protect individuals and communities from public health risks; (d) encourage community participation in order to create a healthy environment; and (e) provide for early detection of diseases and public...
KeywordsWaste management, Waste, Recycling, Waste streams, Labelling, Waste disposalWaste Management Code of Georgia (No. 2994-RS of 2014)| 2014 |Legislation
GeorgiaThe purpose of the Code is to establish a legal framework in the field of waste management, to implement measures that will facilitate waste prevention and its increased re-use as well as environmentally safe treatment of waste (which includes recycling and separation of secondary raw materials, energy recovery from waste and safe disposal of waste). In addition, the objectives of the Code include...
KeywordsFiscal incentives, Hazardous waste, Recycling, Waste, Waste collection, Waste disposal, Waste managementPackaging Management Decree| 2014 |Legislation
NetherlandsKeywordsExtended Producer Responsibility, Plastic packaging, Plastic polymers, RecyclingDecree 2981 of 2013 regulating public sanitation services| 2013 |Regulation
ColombiaKeywordsDeposit-refund schemes , Just transition, Recycling, Stakeholder engagement, Waste management, Waste pickersAct on packaging management and packaging waste.| 2013 |Legislation
PolandThe purpose of this Act is to reduce the quantity and the harmfulness to the environment of materials and substances contained in packaging and packaging waste and the quantity and environmental impact of packaging and packaging waste on the stage of the production process, marketing, distribution and processing, in particular by producing clean products and the use of clean technologies. This Act...
KeywordsExtended Producer Responsibility, Labelling, Recycling, Reusable packaging, Waste collection, Waste disposal, Waste management, Waste preventionLocal Government (Registration of Recycler and Exporter) Regulations 2013 (GN No. 248 of 2013).| 2013 |Regulation
MauritiusRepealedThese Regulations, made by the Minister under section162(2) of the Local Government Act, provide with respect to waste recycling. They shall apply only to the categories of wastes listed in the First Schedule. Any application for registration as recycler or exporter shall be made to the Permanent Secretary in the form specified in the Second and Third Schedules, respectively. Every registered...
KeywordsCertification, Enforcement, Hazardous waste, Recycling, Waste disposal, Waste export, Waste managementAct CLXXXV of 2012 on waste.| 2012 |Legislation
HungaryThe purpose of this Act is the protection of the environment and human health, the mitigation of environmental impact, the efficient management of natural resources, the reduction of the impact and improvement of efficiency of the use of resources, as well as the prevention of waste and its harmful effects, the reduction of its quantity and hazardousness, the re-use of materials, as well as higher...
KeywordsHazardous waste, Plastic waste, Recycling, Waste management, Waste management hierarchyPagination
-
Plastic carrier bags
(195)
-
Plastic packaging
(262)
-
Primary microplastics
(8)